GPS GPRS tracker GPS tracking device (GTD_I)

Vehicle GPS GPRS tracker,GPS tracking device for fleet management.

New!

Vehicle GPS tracker,GPS tracking device, GPS GPRS Tracking device (GTD_I)
smaller and smarter.

 

USB update.
ARM9 CPU
RAM: 64M byte
Flash: 128M ~256M byte

5 digital inputs (2 for control switch. 3 for Level detected)
1 analog signals inputs,
1 outputs, OC drive, 200MA PER/PIN
1 RS232 port Or
2 outputs, OC drive, 200MA PER/PIN Or
2 analog signals inputs, DC 0~12v, 10 bits of precision Or 2 digital inputs. (MUX Pin)
1 USB

Main unit dimensions: 118 * 78 * 30mm
Main unit weight: 0.25kg

** Locate and Track
On receipt of GPS signal, the GTD calculates the position, time, velocity etc. Which can be transferred to control center software with a fixed interval. And the data sending interval (by time interval, distance interval or smart mode) is settable.
** Over-speed Alarm
When over limited speed set prior, an over-speed alarm will be shown on the tracking software in time.
** Geo-fence Alarm
The geo-fence alarm will be shown on the tracking software timely when GTD entry or exit defined area.
** Parameters Settable
Parameters like IP, APN, SMS center number etc. Is settable over the air or by special software and firmware.
** Data Save
It is capable of storing data if GSM signal is unavailable and it will resend the saved data when GSM signal is available.
** Get Ignition On of Off
Status of ignition on or off can be sent to control center software by GTD.

** Remote control
With mandatory sponsor from door, shock, fuel, oil, breaks, handbrakes, RPM, engine and other frequent events, control center operator can sent out command to control the vehicle remotely. (**damage, optional)

** Extend interface
Tell us your detailed requirements, we can do customization with extend interface of GTD. (**optional)

,